BV DIGITAL CONSULTING · DIGITAL MANUFACTURINGIndependent engineering solutions for industrial simulation
Virtual Commissioning

Modbus TCP/IP Interface

Connect Siemens Process Simulate directly to Modbus TCP/IP controllers and PLCs. Exchange input and output signals in real time and use them directly within Process Simulate for control logic, equipment simulation and virtual commissioning.

StatusReady to implement
CompatibilityLine Simulation Mode
Commercial modelCustom engineering
DeliveryCustomer-specific implementation
Overview

What this solution is designed to do

The Modbus TCP/IP Interface enables direct communication between Siemens Process Simulate and controllers or PLCs using the Modbus TCP/IP protocol.

The interface provides configurable input and output signals that can be mapped directly to Process Simulate signals and used throughout the simulation environment.

This allows external Modbus-compatible controllers to control equipment, devices, sensors, actuators and simulation logic inside Process Simulate. At the same time, Process Simulate can send status information and output signals back to the connected controller.

The solution makes it possible to integrate Modbus-based PLCs and control systems into Process Simulate virtual commissioning scenarios without requiring a proprietary communication protocol.

Once the connection and signal mapping are configured, the Modbus signals behave like standard Process Simulate signals and can be used within logic blocks, resources, operations and simulation sequences.

This provides a flexible way to connect industrial controllers and automation systems to Siemens Process Simulate for realistic control testing and virtual commissioning.

ModbusModbus TCP/IPPLCVirtual CommissioningProcess SimulateAutomationIndustrial CommunicationI/OSignal ExchangeController Integration
Capabilities

Capabilities of Modbus TCP/IP Interface

  • Direct Modbus TCP/IP communication with Siemens Process Simulate
  • Connection to Modbus-compatible PLCs and controllers
  • Configurable Modbus input signals
  • Configurable Modbus output signals
  • Direct mapping to Process Simulate signals
  • Bidirectional signal exchange
  • Real-time communication during simulation
  • Control of Process Simulate equipment and devices
  • Exchange of sensor and actuator signals
  • Integration with Process Simulate logic
  • Integration with external control systems
  • Suitable for virtual commissioning
  • Support for industrial automation testing
  • Configurable IP address and communication parameters
  • Flexible signal mapping for different controller configurations
Screenshots

Impressions from the solution

More solutions